AXIOMTEK SBC8168, Руководство пользователя

Страница: 56 / 72

SBC8168 Socket 370 All-in-One CPU Card Series User’s Manual
Award BIOS Utility 44
z
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC +
Blank
This causes the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer.
DPMS
Select this option if your monitor supports the Display Power
Management Signaling (DPMS) standard of the Video Electronics
Standards to select video power management values.
Blank Screen
This option only writes blanks to the video buffer.
z
Modem Use IRQ
This field names the interrupt request (IRQ) line assigned to the
modem (if any) on your system. Activity on the selected IRQ
always awakens the system. The available choices are 3, 4, 5, 7,
9, 10, 11, and NA. By default, the IRQ is set to
3 .
z
Suspend Mode
When enabled, and after the set time of system inactivity, all
devices except the CPU will be shut OFF.
z
HDD Power Down
When enabled, and after the set time of system inactivity, the
hard disk drive is powered down while all other devices remain
active.
z
Soft-Off by PWR-BTTN
This only works with systems using an ATX power supply. It also
allows tser to define the type of soft power OFF sequence the
system will follow.
Instant-Off
(default)
This option follows the conventional manner systems perform when
power is turned OFF. Instant-Off is a soft power OFF sequence
requiring only the switching of the power supply button to OFF.
Delay 4 Sec.
Upon turning OFF system from the power switch, this option will
delay the complete system power OFF sequence by approximately 4
seconds. Within this delay period, system will temporarily enter into
Suspend Mode enabling you to restart the system at once.
z
Wake Up On LAN2
An input signal on the network 2 awakens the system from a soft-
off state.
z
Power On Ring
An input signal on the serial Ring Indicator (RI) line (in other
words, an incoming call on the modem) awakens the system from
a soft off state.