AXIOMTEK SBC8168 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 72

AXIOMTEK SBC8168 Скачать руководство пользователя страница 37

SBC8168 Socket 370 All-in-One CPU Card Series User’s Manual

Ethernet

25

C h a p t e r 6

Ethernet

6.1 Introduction

The

SBC8168

is equipped with two high performance Plug and

Play Ethernet interfaces which are fully compliant with the
IEEE 802.3 standard, and consisting of a RJ-45 connector

(CN12

and

CN23)

.

6.2

Features (Ethernet 1 and Ethernet 2)

z

10Mb/s and 100Mb/s operations

z

Supports 10Mb/s and 100Mb/s N-Way auto negotiation

z

Full duplex capability

z

Full compliance with PCI Revision 2.1

z

PCI Bus Master data transfers

z

Backward compatible software with 82557, 82558, and
82559

6.3

Drivers Supported (Ethernet 1 and
Ethernet 2)

Bundled with popular software drivers, the

SBC8168

Ethernet

interface allows great flexibility to work with all major
networking operating systems including Novell NetWare v2.x,
v3.x, v4.x, Microsoft LAN Manager, Win3.1, Win NT/2000,
Win95/98/Me, IBM LAN Server, SCO UNIX or other ODI, NDIS
and Packet drive compliant operating systems.

NOTE:

Before you begin the driver software installation,

please see the detail of installation procedure from

the driver utility in CD-ROM and be sure to make

installation and backup copies of the Ethernet

Driver Diskettes.

«
...
35
36
37
38
39
...
»

Содержание SBC8168









































































Отзывы:

Нет отзывов