SBC8168 Socket 370 All-in-One CPU Card Series User’s Manual
Award BIOS Utility
41
BUTTON-ONLY
Follows the conventional way of turning OFF system power
(via power button).
Password
Upon selecting this option, the KB POWER ON Password line
appears. Press <Enter> and you’ll be prompted to enter and
confirm a password of your choice.
After setting the password, succeeding attempts to power ON
the system will result to null. For system to activate, user
must input the password via keyboard then press <Enter>.
Hot KEY
This option is very similar with that of Password. Hot-key
combinations range from Ctrl-F1 to Ctrl-F12. User may define
this combination from the Hot key Power ON option.
Mouse
Left
This allows system to POWER ON by clicking the left mouse
button. To enable, user must reboot and allow system to
finish booting up otherwise the setting will not take effect.
Mouse Right
This allows system to POWER ON by clicking the right mouse
button. To enable this setting, user must reboot and allow
system to finish the boot up process otherwise the setting will
not take effect.
z
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC)
installed on the system board and you wish to use it. If you install
and-in FDC or the system has no floppy drive, select Disabled in
this field. The options available are Enabled, Disabled.
z
Onboard Serial Port 1/Port 2
Select an address and corresponding interrupt for the first and
second serial ports. The options available are 3F8/IRQ4,
2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.
z
UART Mode Select
The second serial port offers these infrared interface modes:
¾
IrDA
¾
ASKIR IrDA-compliant serial infrared port
¾
Normal (default value)
NOTE:
The UART Mode Select will not appear on the
menu once you disable the setting of Onboard
Serial Port 2.
When UART Mode Select is set as ASKIR or IrDA, the options
RxD, TxD Active and IR Transmittion delay will appear.
z
Onboard Parallel Port
This item allows you to determine access onboard parallel port
controller with which I/O address. The options available are
378H/IRQ7, 278H/IRQ5, 3BC/IRQ7, Disabled.
Содержание SBC8168
