AXIOMTEK SBC8168, Руководство пользователя

Страница: 31 / 72

SBC8168 Socket 370 All-in-One CPU Card Series User’s Manual
Hardware Description 19
4.8 Ethernet Connector
The RJ-45 connector is used for Ethernet. To connect the
SBC8168 to 10-Base-T or 100-Base-T hub, just plug one end
of the cable into the CN23 and connect the other end (phone
jack) of the cable to a 10-Base-T hub.
4.9 Floppy Disk Controller
The SBC8168 provides a 34-pin header type connector, CN2 ,
supporting up to two floppy drives. The floppy drives may be
any one of the following types: 5.25" 360KB/1.2MB and 3.5"
720KB/1.44MB/2.88MB. The
CN2 pin assignment is listed in
Appendix B.
4.10 Parallel Port Interface
The SBC8168 onboard CN3 is a multi-mode parallel port able
to support:
z
Standard mode: IBM PC/XT, PC/AT and PS/2
TM
compatible with bi-directional
parallel port
z
Enhanced mode: Enhance parallel port (EPP)
compatible with EPP 1.7 and EPP
1.9 (IEEE 1284 compliant)
z
High speed mode: Microsoft and Hewlett Packard
extended capabilities port (ECP)
IEEE 1284 compliant
The address select of the onboard parallel port in LPT1 (3BCH)
or disabled is done by BIOS CMOS setup.