SBC81613 Socket 370 All-in-One CPU Card Series User
’
s Manual
BIOS Configuration
53
¾
IrDA
¾
ASKIR IrDA-compliant serial infrared port
¾
Normal (default value)
NOTE:
The UART Mode Select will not appear on the
menu once you disable the setting of Onboard
Serial Port 2.
When UART Mode Select is set as ASKIR or IrDA, the
options RxD, TxD Active and IR Transmittion delay will
appear.
z
IR Function Duplex
This item allows you to select the IR half/full duplex funcion.
z
TX,RX inverting enable
This item has allowed you to enable the TX, RX inverting
which depends on different H/W requirement. This field is
not recommended to change its default setting for avoiding
any error in your system.
z
Onboard Parallel Port
This item allows you to determine access onboard parallel
port controller with which I/O address. The options available
are 378H/IRQ7, 278H/IRQ5, 3BC/IRQ7, Disabled.
z
Parallel Port Mode
Select an operating mode for the onboard parallel (printer)
port. Select Normal unless your hardware and software
require one of the other modes offered in this field. The
options available are EPP1.9, ECP, SPP, ECPEPP1.7,
EPP1.7.
z
ECP Mode Use DMA
Select a DMA channel for the parallel port for use during
ECP mode.
z
Parallel Port EPP Type
Select EPP port type 1.7 or 1.9
z
Sound Blaster
z
SB I/O Base Address]
The item allows you to select onboard AC’97 audio Enable
or Disabled.
