SBC81613 Socket 370 All-in-One CPU Card Series User
’
s Manual
BIOS Configuration
46
This item allows the user to select the LAN boot ROM
support LAN1 or LAN2.
z
Optimized Default Select
This item allows the user to select the Load Optimized
Default is load bios default or optimized default.
z
Swap Floppy Drive
This allows you to determine whether to enable Swap Floppy Drive
or not. When enabled, the BIOS swaps floppy drive assignments
so that Drive A becomes Drive B, and Drive B becomes Drive A.
By default, this field is set to
Disabled.
z
Boot Up Floppy Seek
When enabled, the BIOS seeks for number of track (40 or 80) of
the installed floppy drive. 360K type has 40 tracks while 760K,
1.2M and 1.44M have 80 tracks. By default, this field is set to
Enabled.
z
Boot Up NumLock Status
This activates the NumLock function after powering up the system.
By default, the system boots up with
NumLock
ON.
z
Gate A20 Option
Gate A20 refers to the way the system addresses memory above 1
MB (extended memory). When set to Fast, the system chipset
controls Gate A20. When set to Normal, a pin in the keyboard
controller controls Gate A20. Setting Gate A20 to Fast improves
system speed, particularly with OS/2 and Windows.
z
Typematic Rate Setting
When Disabled, the following two items (Typematic Rate and
Typematic Delay) are irrelevant. Keystrokes repeat at a rate
determined by the keyboard controller in your system. When
Enabled, you can select a typematic rate and typematic delay.
z
Typematic Rate (Chars/Sec)
When the typematic rate setting is enabled, you can select a
typematic rate (the rate at which character repeats when you hold
down a key) of 6, 8, 10,12, 15, 20, 24 or 30 characters per second.
z
Typematic Delay (Msec)
When the typematic rate setting is enabled, you can select a
typematic delay (the delay before key strokes begin to repeat) of
250, 500, 750 or 1000 milliseconds.
