AXIOMTEK ETM710 Series, Руководство пользователя, Страница: 44 / 60

ETM710 VIA V4 ETX v3.0 SoM User’s Manual
40
Award BIOS Utility
z Super I/O Device
Scroll to this item and press <Enter> to view the Super I/O Device sub
menu.
¾ Onboard FDC Controller
Select Enabled, if your system has a floppy disk controller
(FDC) installed on the system board and you want to use it.
If you install and-in FDC or the system has no floppy drive,
select Disabled in this field. Options: Enabled and Disabled.
¾ Onboard Serial Port 1/2
Select an address and corresponding interrupt for the serial
port. Options: 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3,
Auto and Disabled.
¾ URAT Mode Select
When UART Mode Select is set as ASKIR or IrDA, the
options RxD, TxD Active and IR Transmittion delay will
appear.
¾ IR Transmission Delay
Enable or disable this item to decide if the IR transmission
delay function will be set or not while transferring to the
reception mode.