AXIOMTEK ETM710 Series Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 60

AXIOMTEK ETM710 Series Скачать руководство пользователя страница 31

ETM710 VIA V4 ETX v3.0 SoM User’s Manual

Award BIOS Utility

27

z

IDE Channel 0 Master/IDE Channel 0 Slave/IDE Channel 1

Master/IDE Channel 1 Salve

These items identify the types of each IDE channel installed in the
computer. There are 45 predefined types (Type 1 to Type 45) and
2 user’s definable types (Type User) for Enhanced IDE BIOS.
Press <PgUp>/<+> or <PgDn>/<

−

> to select a numbered hard disk

type, or directly type the number and press <Enter>. Please be
noted your drive’s specifications must match the drive table. The
hard disk will not work properly if you enter improper information. If
your hard disk drive type does not match or is not listed, you can
use Type User to manually define your own drive type.
If selecting Type User, you will be asked to enter related
information in the following items. Directly key in the information
and press <Enter>. This information should be provided in the
documentation from your hard disk vendor or the system
manufacturer.
If the HDD interface controller supports ESDI, select “Type 1”.
If the HDD interface controller supports SCSI, select “None”.
If the HDD interface controller supports CD-ROM, select “None”.

CYLS.

number of cylinders

LANDZONE

landing zone

HEADS

number of heads

SECTORS

number of sectors

PRECOMP

write precom

MODE

HDD access mode

If there is no hard disk drive installed, select NONE and press
<Enter>.

z

Halt On

This item determines whether the system will halt or not, if an error
is detected while powering up.

No errors

The system booting will halt on any errors detected.
(default)

All errors

Whenever BIOS detects a non-fatal error, the
system will stop and you will be prompted.

All, But
Keyboard

The system booting will not stop for a keyboard
error; it will stop for other errors.

All, But
Diskette

The system booting will not stop for a disk error; it
will stop for other errors.

All, But
Disk/Key

The system booting will not stop for a keyboard or
disk error; it will stop for other errors.

«
...
29
30
31
32
33
...
»

Содержание ETM710 Series





























































Отзывы:

Нет отзывов