AXIOMTEK ETM710 Series Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 60

AXIOMTEK ETM710 Series Скачать руководство пользователя страница 27

ETM710 VIA V4 ETX v3.0 SoM User’s Manual

Award BIOS Utility

23

C h a p t e r 4

Award BIOS Utility

The Phoenix-Award BIOS provides users with a built-in Setup
program to modify basic system configuration. All configured
parameters are stored in a battery-backed-up RAM (CMOS RAM) to
save the Setup information whenever the power is turned off.

4.1 Entering

Setup

There are two ways to enter the Setup program. You may either turn
ON the computer and press <Del> immediately, or press the <Del>
and/or <Ctrl>, <Alt>, and <Esc> keys simultaneously when the
following message appears at the bottom of the screen during POST
(Power on Self Test).

TO ENTER SETUP PRESS DEL KEY

If the message disappears before you respond and you still want to
enter Setup, please restart the system to try it again. Turning the
system power OFF and ON, pressing the “RESET” button on the
system case or simultaneously pressing <Ctrl>, <Alt>, and <Del>
keys can restart the system. If you do not press keys at the right time
and the system doesn’t boot, an error message will pop out to prompt
you the following information:

PRESS <F1> TO CONTINUE, <CTRL-ALT-ESC> OR <DEL> TO ENTER SETUP

«
...
25
26
27
28
29
...
»

Содержание ETM710 Series





























































Отзывы:

Нет отзывов