AXIOMTEK CEB94022, Руководство пользователя

Страница: 50 / 50

CEB94022 COM Express
TM
Type 6 with MXM Application Board
44 AMI BIOS
 Graphics Configuration
Primary Display
Select the primary display device.
Internal Graphics
Keep IGFX enabled based on the setup options; Auto, Disabled, Enabled.
DDI1 Signal Select
Select the DDI1 signal (display output on CN22 upper side) to DisplayPort. This item must
be set to DisplayPort if you want to enable DP port on CEB94022.
DDI2 Signal Select
Select the DDI2 signal (display output on CN22 lower side) to HDMI/DVI. This item must
be set to HDMI/DVI if you want to enable HDMI port on CEB94022.
Primary IGFX Boot Display
Select the video device which will be activated during POST (Power-On Self Test). The
default is Auto.
LVDS Panel Device
Enable or disable LVDS panel support.
LVDS Panel Type
Select LVDS panel resolution.
Backlight Control
Use this item to select backlight control mode.
Note

DDI3 is VGA output on CEM Express
TM
module.