AXIOMTEK CEB94022, Руководство пользователя

Страница: 16 / 50

CEB94022 COM Express
TM
Type 6 with MXM Application Board
10 Board and Pin Assignments
2.4.1 LVDS Voltage Selection (JP1)
The board supports voltage selection for flat panel displays. Use this jumper to set LVDS
connector (CN16) pin 1~6 VCCM to +3.3V, +5V or +12V. To prevent hardware damage,
before connecting please make sure that the input voltage of flat panel is correct.
2.4.2 Restore BIOS Optimal Defaults (JP2)
Put jumper clip to pin 2-3 for a few seconds then move it back to pin 1-2. Doing this
procedure can restore BIOS optimal defaults. Use SPI select to determine which BIOS
to restore; BIOS on COM Express
TM
module or BIOS on baseboard (see section 2.4.3).
2.4.3 Boot BIOS Selection (JP5)
Use JP5 to select system to boot from module BIOS or baseboard BIOS.
2.4.4 Auto Power On (JP6)
If JP6 is enabled for power input, the system will be automatically power on without
pressing soft power button. If JP6 is disabled for power input, it is necessary to manually
press soft power button to power on the system.
Function Setting
+3.3V level (Default) 1-2 close
+5V level 2-4 close
+12V level 5-6 close
Function Setting
Normal operation (Default) 1-2 close
Restore BIOS optimal defaults 2-3 close
Function Setting
Module BIOS (Default) 1-3, 2-4 close
Baseboard BIOS 1-3, 4-6 close
Function Setting
Enable auto power on 1-2 close
Disable auto power on (Default) 2-3 close