8
5)
Replace the old battery with the new one by respecting the correct polarity! For the battery
type, please refer to the technical data section.
6)
Carefully close the casing.
7)
Insert the screws and ensure they are tightened.
Warning! If the instrument is likely to remain unused for a long period of time the batteries
must be removed. If a battery should leak inside the housing, return the instrument to our service
department for cleaning and checking. Please think of our environment when getting rid of used
batteries. They should be disposed of in a place suitable for hazardous waste.
Technical specifications
(valid for 23
°
C
±
5
°
C, max. 80% rel. humidity)
Display:
3 ¾ digit LCD, 3999 digits with symbols for units and used batteries.
Overload display:
“OL” is displayed
Battery display:
Battery in the display means “replace the battery”
Power supply:
2 x1,5V, IEC LR03
Clamp opening:
28 mm
Current consumption:
<3mA
Temperature range:
0
°
C…+50
°
C at max 80% relative humidity
Storage temperature:
-10
°
…60
°
C
Protection class:
IP40
Altitude:
up to 2000m
Pollution degree:
2
Overvoltage category:
CAT III/600V against ground
Dimensions:
65x185x35 mm
Weight:
approx. 175 g incl. battery
