6
Caution! Do not apply around or remove from HAZARDOUS LIVE conductors.
Warning! Only use the instrument in circuits fused with max. 16A
Warning! Before switching to a New function, the probes must always be removed from the
UUT (Unit Under Test)
DC Voltage measurement
1)
Select measurement range “
with Range selection switch (3)
2)
Select range “
” with AC/DC switch key (8)
3)
Connect test leads to UUT
4)
Read the measured value on the display
AC Voltage measurement
1)
Select measurement range “V” with Range selection switch (3)
2)
Select range “
~
” with Ac/DC switch key (8)
3)
Connect test leads to UUT
4)
Read the measured value on the display
Resistance measurement
Caution! Ensure that the UUT is switched off and that no voltage is present.
1)
Select measurement range “
” with Range selection switch (3)
2)
Connect test leads to UUT
3)
Read the measured value on the display.
Continuity test
Caution! Ensure that the UUT is switched off and that no voltage is present.
1)
Select measurement range “
” with Range selection switch (3)
2)
Connect test leads to UUT
3)
Read the measured value on the display. A signal sound is audible at resistance values less than
40
Ω
.
