Axiom CNC Series, Инструкция по сборке

Страница: 17 / 29

17
4- Now we can fit the single front bottom cross member as per the pictures shown. Take
note that the magnetic door stops should be facing up. Again, it is very important to
ensure all connections are flush on both sides
Figure 29 Bottom front cross member Figure 30 Bottom front cross member complete
5- Now we can proceed to hang the doors. Make sure you have the correct door in the
correct location before hanging. This can be done by placing them as per the picture
below before lifting them in place.
Figure 31 Door Locations