Axiom CNC Series, Инструкция по сборке

Страница: 9 / 29

9
b. The small rubber pads should now be between the flange and the top surface of the
brace. This will help prevent unwanted movement and scratching.
A
XIOM
T
OOLBOX
1- Turn the tool-box upside down. Install (1) of
each hanger on either side of the toolbox using
the installed rivnuts and (2) 3mm cap-screw
each.
2- Insert the toolbox into the stand, from the top.
The hangers will with snugly between the
braces on either side of the toolbox.
3- The front can be slid forward to rest within the
opening on the stand upright.
Figure 10: Toolbox
Figure 11: Hangers for toolbox