TPSK 12 & 24 V User’s Manual
Page 10 / 66
Reference: FDE 31 08 972 Issue Z
2.2 Housing features for ticket access
See section «Recommendations».
2.3 Paper Loading
Maximum paper roll diameter is 102 mm. Paper / roll width must be 59 to 60 mm.
The following steps are needed to load the paper:
- Open the door by pulling it
- Remove the core of the preceding roll if necessary
- Place the new roll
- Set the paper end through the door chute over the platen
- Close the door, keeping the paper end tight to avoid a possible paper loop.
- Pull the paper end to cut; it the paper is loaded.
Step n°1
Step n°2
Step n°3
Step n°4
