8
DC mA output
Sourcing mA
1
Press the power switch
5
, turn on the Calibrator.
2
Press the input/output conversion key
8
, when the state of no output indicator
15
.
Make it under the state of output.
3
Press the mA mA% conversion key
7
, make it indicate mA or mA%
18
, at the state of output
you need.
4
Press the value adjust key
9
,
10
,
11
,
12
, make the value on you want.
5
Put the red test lead in LOOP Jack
1
, black one to the V Jack
4
.
6
Connect the red lead with the positive of current which is waiting for output, black one to the
negative.
7
If you want to change the output value or state then press the value adjust key
9
,
10
,
11
,
12
or the mA mA% conversion key
7
.
Simulating a Transmitter
1
Press the power switch
5
, turn on the Calibrator.
2
Press the input/output conversion key
8
, when the state of no output indicator
15
.
Make it under the state of output.
3
Press the mA mA% conversion key
7
, make it indicate mA or mA%
18
, at the state of output
you need.
4
Press the value adjust key
9
,
10
,
11
,
12
, make the value you want.
5
Put the red test lead in V jack
4
, black one to the COM jack
3
