6
4
Press the value adjust key
9
,
10
,
11
,
12
make the value you want.
5
Put the red test lead in V jack
4
, black one to the COM Jack
3
6
Connect the red test lead with the positive of voltage which is waiting for measurement,
black one to the negative(ground).
7
If you want to change the output value or range, then press the value adjust key
9
,
10
,
11
,
12
or the V mV conversion key
6
.
DC mA measurement
Outside supply power measurement
1
Press the Power switch
5
turn on the Calibrator.
2
Press the input/output conversion key
8
, when the state of no input indicator
14
.
Make it under the state of measurement.
3
Press the mA mA% conversion key
7
, make it indicate mA or mA%
18
, at the state of
measure you Reed.
4
Put the red test lead In mA Jack
2
, black one to the COM jack
3
5
Connect the red test lead with the positive of current which is waiting for measurement,
black one to the negative (ground)
6
The value of result show
16
