![axing MIP 16-00 Скачать руководство пользователя страница 89](http://html1.mh-extra.com/html/axing/mip-16-00/mip-16-00_manual_3036629089.webp)
2022-01-10 | Technical improvements, changes in design, printing- and other errors reserved. | BA_MIP-8-16-0x.pdf
Page 41 of 48
5.11.
Licenses
5.11.1.
Licenses for Software Extensions
Software extensions can be used to extend the functions of a headend. You require a license for a software extension.
Purchase licenses
You can purchase a license by ordering the appropriate software extension from AXING. When ordering, you must provide the
serial number of the headend. A license file will be generated for you to match exactly this serial number. Important: The
license is bound to the serial number and is not transferable to other devices!
Load license file
Licenses can be loaded onto the headend in different ways:
By AXING support via remote maintenance software (e.g. TeamViewer):
–
The headend must be connected to a
PC/notebook via Ethernet.
–
The notebook requires Internet access.
–
You need a valid software license and the
current version of the remote maintenance
software.
By the user or AXING support via SMART Portal:
–
The headend must be integrated into the
SMART Portal and requires Internet access.
–
If AXING support should upload the license file,
the option Allow AXING support must be
activated for the headend.
By the user in the configuration interface:
–
You have ordered a software extension and
received a license file by e-mail.
–
You upload the license file (SN.lic) in the
configuration interface of the headend under
MAINTENANCE>LICENSES.
Note: The new function is only available after a
restart of the headend.
Click on LICENCES.
The dialog ACTIVATED LICENSES will be
opened.
The already activated licenses and their expiration
date are displayed (permanent means that the
license never expires).
Under UPLOAD A NEW LICENSE, select a
LICENSE FILE.
Click on UPLOAD.
The upload will take a few seconds.
The new license is listed in the ACTIVATED
LICENSES dialog.
Reboot the device and log in again.
The new function is only available after a restart of the headend.