AXIMCom X-108NX, Руководство пользователя

Страница: 54 / 94

50
3. Click on [Add] tab. You will see the following screen.
4. Configure [Add Access Control List (ACL)] Settings following the instructions below
Sequence Number This defines the sequence of the ACL rules. If a packet fits the
conditions set by the ACL rules, the packet will then be sorted
according to the first ACL rule from the top of the list.
Rule Name Name of the ACL rule.
Rule Enable Enable/Disable this ACL rule
External Interface Please select which External Interface (WAN1 or WAN2) you want a
packet to go through, IF the packet fits the condition of this ACL rule.
Internal IP Range Set up the internal IP range for this ACL rule.
External IP Range Set up the external IP range for this ACL rule.
Protocol Set up the protocol (TCP or UDP) for the ACL to be enabled.
Service Port Range Set up the Service Port Range (e.g., HTTP is TCP/80) for the ACL to be
enabled.
Action
Select ALLOW / DENY
。