AXIMCom X-108NX, Руководство пользователя

Страница: 31 / 94

27
5.2 WAN DETECT
There are stability issues when use 3G network. Sometime the 3G data card is connected with the 3G station but
the data cannot be sent or received.
In this case, users can use the WAN Detect function to continuously ping a host, and get re-connected to the
3G station when detection fail is occurred.
Please note that this function is not supported in storage mode
1. Click on [Setup] – [WAN Detect] tab. You will see the following screen.
2.
Configure the basic settings of Load Balance following the instructions below.
External Connection
Detection
Choose Enable/Disable to enable/disable connection detection.
Detection Host Enter the IP address or domain name of the host to be detected.
Detection Interval Detection Interval is 60 seconds
Connection
Detection Threshold The system will generate a PING packet to detect whether the connection
is still connected. If the Host is not response for this threshold value, the
system is considered to be WAN lost.