11
Place a suitable pan on the cooking zone thatyou wish to use.
• Make sure the bottom of the pan and the surface ofthe
cooking zone are clean and dry.
Touching the heating zone selection control,and an indicator
next to the key will flash
Select a heat setting by touching the slider control
• If you don’t choose a heat setting within 1 minute,the
Induction hob will automatically switch off. You will need to
start again atstep 1.
• You can modify the heat setting at any time duringcooking.
If the display flashesalternately with the heat setting
This means that:
•you have not placed a pan on the correct cooking zone or,
•the pan you’re using is not suitable for induction cooking or,
•the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 2 minutes if no suitable pan is placed on it.
3.3.2 Finish cooking
Touching the heating zone selection control that you wish
to switch off.
Turn the cooking zone off by touching the slider
to“
○
”.Make sure the displayshows”0”
Turn the whole cooktop off by touchingthe ON/OFFcontrol.
Beware of hot surfaces
