Axi STS 7030, Руководство пользователя

Страница: 25 / 42

OPERATION
! WARNING ! Do not use with gasoline. This System is not meant for use with gasoline
nor with other flammable liquids having a flash point less than 100°F. Use with gasoline
or use with any flammable liquids at a temperature exceeding their flash point,
presents an immediate explosion and fire hazard.
! WARNING ! Never use the STS 7030 at a temperature exceeding the flash point of its
contents.
EMERGENCY STOP
Note: In case of an emergency the pump can be turned off and disabled by depressing the red
“EMERGENCY STOP” button on the control panel.
To release the “EMERGENCY STOP” button located on the control panel turn the red knob in the direction
indicated by the arrows on the mushroom button and push the “ALARM RESET” button to acknowledge.
PUMP OPERATION
Apply control power to unit. Place breakers in the AXI International Smart Filtration Controller in the “ON”
position.
Automatic:
Place the key switch in the “AUTO” position. When the timer contacts close, the pump will start and run
until the timer setting has expired.
Manual (Override):
Place the key switch in the “RUN” position. The pump motor will run until the switch is returned to the
“OFF” or “AUTO” mode positions or till an alarm or overload has been tripped.
SETTING THE CURRENT TIME AND DATE
Note: PLC uses military time – all times must be programmed in that format.
1. From the STS 7004 Home Screen, touch and hold the screen background for 5 seconds to enter
the Info Mode Menu.
2. Touch the “Enter Info Mode” button.
3. Enter 4 digit security code.
4. Touch the “Time & Date” button.
5. Touch the Date value to set the Date. Use dd/mm/yy format.
6. Touch the Time value to set the current time.
7. Press ESC to navigate back to the STS 7004 Home Screen.
`
`