Axi MTC-X, Инструкция по эксплуатации и техническому обслуживанию

Страница: 14 / 36

14 REV0303MTCX010318
1. Connect suction hose (Figure 2.2)
2. Connect discharge hose (Figure 2.3)
3. Attach straight wand or pipe to suction hose and place into the fuel tank.
4. Place discharge hose into separate container (Figure 2.4).
5. Place the diverter valve in Bypass Mode (Position #1). See “Operational Modes” section for an explanation of the
diverter valve and operational modes.
6. Ensure the accessory selection valve is in the OFF position.
7. Ensure Inlet Ball valve is open and start system.
8.
Drain the water and sludge from the bottom of the tank, watching the holding container to prevent spillage.
Cam and Groove, suction hose, and connection. Figure 2.2-
Cam and Groove, discharge hose, and connection. Figure 2.3-
air
fuel
sludge/water
Cam and Groove, discharge hose, and connection. Figure 2.4-
MAINTENANCE
PRIMING
OPERA
TION
PRIMAR
Y INSPECTION
O
VER
VIEW
S
Y
S
TEM C
OMPONENT
S
C
OMMISSIONING