Axeon Water Technologies L1-Series, Руководство пользователя

Страница: 8 / 29

L1-Series User’s Manual
MKTF-258
8 9/14
SYSTEM INSTALLATION AND START-UP PROCEDURES
1. Inspect the system for any damage that could have occurred during shipment. Although
our systems have been individually inspected, complete a quick inspection of the fittings,
tubing and other components.
2. Please provide a reasonable amount of space for installation and leave 6 inches of space
below the filter housings for ease of maintenance.
NOTE: THE REVERSE OSMOSIS SYSTEM SHOULD BE INSTALLED
INDOORS AND IT IS SUGGESTED THAT IT NOT BE IN DIRECT SUNLIGHT OR
EXTREME COLD.
3. Connect the 3/8” tube fitting to an incoming water source. The minimum water pressure
should be at least 30 psi. The system’s minimum operating pressure is 80 PSI, but the
optimum operating pressure is 100 psi.
NOTE: DO NOT OPERATE AT A PRESSURE EXCEEDING 125 PSI. The
operating pressure can be increased on the face of the booster pump by turning the hex
screw clockwise.
4. Connect the concentrate 3/8” tubing (waste) line to drain.
5. Plug the booster pump transformer into a power supply of 110 volts 60 Hz.
6. This system has been designed with an auto-flush restrictor. This restrictor automatically
flushes the reverse osmosis system for 30 seconds every time it starts up and once every
hour when the system is producing water.
NOTE: THE TANK PRESSURE SWITCH WILL SHUT THE SYSTEM OFF
AUTOMATICALLY WHEN THE BLADDER TANK IS FULL.