Axeon Water Technologies L1-Series, Руководство пользователя

Страница: 6 / 29

L1-Series User’s Manual
MKTF-258
6 9/14
DISCONNECT THE ELECTRICAL POWER BEFORE WORKING ON
THE UNIT.
• NEVER ALLOW THE PUMP TO RUN DRY.
• NEVER ALLOW THE UNIT TO FREEZE OR OPERATE WITH A FEED
WATER TEMPERATURE ABOVE 100°F.
FEED WATER AND OPERATION SPECIFICATIONS
Nothing has a greater effect on a reverse osmosis system than the feed water
quality.
NOTE: IT IS VERY IMPORTANT TO MEET THE MINIMUM FEED WATER
REQUIREMENTS. FAILURE TO DO SO WILL CAUSE THE MEMBRANE TO
FOUL AND VOID THE MANUFACTURER’S WARRANTY.
OPERATING LIMITS
Operating Parameters:*
Feed Temperature 40 - 85°F
System Inlet Pressure 45 - 85 PSIG
Maximum Operating Pressure (@77°F) 120 PSIG (Nominal)
*If any of the feed water parameters are not within the limits given, consult your local dealer or
distributor for assistance.
Feed Water Requirements:**
Maximum SDI Rating < 3
Maximum Turbidity 1 NTU
Maximum Free Chlorine and/or Chloramines 0 PPM
pH (continuous) 3 - 11
pH (cleaning - 30 min.) 2 - 12
**If any of the feed water parameters are not within the limits given, consult your local dealer or
distributor for assistance.
NOTE: HIGHER TDS AND/OR LOWER TEMPERATURES WILL REDUCE
THE SYSTEM’S PRODUCTION.