
GENERAL DESCRIPTION
ENG
Pag. 31
7 AUX
1 Input: Bnc female connector. Depending on the MPX board configuration, it allow the injection
of RDS/SCA or MPX signals from external encoders/generators. The resultant signal is available on
the Output connectors OUT 1 or OUT 2. Factory preset: - 20dB gain. Gain my be altered to 0 dB
8
AUX 2 input: Bnc female connector. Depending on the MPX board configuration, it allows the injection
of RDS/SCA or MPX signals from external encoders/generators. The resultant signal is available on
the Output connectors OUT 1 or OUT 2. Factory preset: - 20dB gain. Gain my be altered to 0 dB
9 AUX 3 input: Bnc female connector. Depending on the MPX board configuration, it allow the injection
of RDS/SCA or MPX signals from external encoders/generators. The resultant signal is available on
the Output connectors OUT 1 or OUT 2. Factory preset: 0dB gain. Gain my be altered to – 20 dB
10 ANALOG AUDIO OUTPUT: It provides the L and R processed audio signals on which it is possible to
enable/disable pre-emphasis. The level is set via the menu.
11 ANALOG AUDIO INPUT: bi-channel audio input electronically balanced on XLR female. The input
level is set via menu.
12 DIGITAL AUDIO INPUT: This has two connectors: use the XLR for balanced AES/EBU coaxial
connections and the tos-link for optical S/PDIF connections.The XLR input conforms to the 110 ohm
impedance standard using a 3-pin XLR female connector. Use only rated digital audio cables. Ordinary
audio cable can cause jitter, resulting in noise or distortion in the audio.
13 DIGITAL AUDIO OUTPUT: This has two connectors: use the XLR for balanced coaxial connections
and the tos-link for optical connections. The AES/EBU output conforms to the 110 ohm standard using
a 3-pin XLR male connector. It is capable of driving any standard digital audio cable run. Be sure to
use only digital audio rated cabling for best results.
14 SYNC IN When running digital audio interface, the Falcon 50 may synchronize to the AES/EBU signal
provided to this input. Alternatively, it may synchronize to the regular AES/EBU input signal, or to the
default internal crystal oscillator if no digital audio input is present.
15 OPTO INPUT PORT: SubD 15-pin female Interface. It supports 6 optoinsulated “trigger” inputs which
can be used to control various Falcon 50 internal functions, such as audio input selection, current
processing curve, mix balance between MPX outputs and AUX inputs, etc
16 OPTO OUTPUT INTERFACE: SubD 15-pin male Interface. It supports 4 optoinsulated outputs for
various purposes (signalling, alarms, etc).
17 ETHERNET port*. RJ45 (LAN) connector. A TCP/IP connection may be set up with a PC on which the
remote control software provided runs. The data exchange is achieved via a simple IP Port Protocol.
* available as an option
Содержание Falcon 50 FM
Страница 2: ...Pag 2...
Страница 29: ...AUDIO AND MPX GENERAL SETTINGS ENG Pag 29 SyncOUT Aux Inputs MPX Outputs M P X...