Axel Falcon 50 FM, Руководство по эксплуатации, Страница: 24 / 45

FIRST INSTALLATION RECOMMENDATIONS
ENG
Pag. 24
14 FIRST INSTALLATION RECOMMENDATIONS
14.1 POWER SUPPLY CABLE
A power supply cable of approx. 2 m length is supplied with the device. The type of plug for the power supply
depends on the country in which it is delivered. Supply cables should be laid in such a manner that one does
not step or walk on them. They should not be squashed by any objects.
THIS EQUIPMENT MUST BE EARTHED.
The chassis is always connected to mains earth to ensure your safety: check your mains wiring and earthing
before switching on.
14.2 AC MAINS VOLTAGE SETTING (230 V / 115 V)
BE SURE THAT THE UNIT IS SET TO THE CORRECT MAINS/LINE VOLTAGE FOR
YOUR COUNTRY BEFORE PLUGGING IT INTO THE WALL OUTLET !
The actual Mains voltage is indicated on the label stuck on the equipment closure. Should the type of power
at the operation location not be known, please contact your dealer or electricity company.
Model :
Manufacturer
S-N : XXX
VA
VA
mAT
mAT
230V
115V
KKKK
If, for some reason, the unit is to be operated at a mains input voltage which is different to that as supplied,
you need to open the top cover and set properly the voltage change-over switch which is located inside,
close to the transformer. You also need to replace the AC main fuse, according to information provided on
the external label or on the Technical Specifications table at the end of this user manual.
CAUTION:
TO REDUCE THE RISK OF ELECTRICAL SHOCK, ALWAYS DISCONNECT
THE AC MAINS CABLE BEFORE ALTERING THE CHANGE-OVER SWITCH. NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.