AWH DN10 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 28

AWH DN10 Скачать руководство пользователя страница 7

11/13

Inline Sight Glass

Operating Instructions

10

The AWH inline sight glasses are intended for installation in pipelines. They are for monitoring the fl ow of

fl uid in commercial and industrial operations (food, chemical and pharmaceutical industries and lowgerm

processes) and have been designed and built specifi cally for that purpose. Suitable fl ow media include

water, steam, food and liquids from the chemical and pharmaceutical industry subject to a hygienic

standard.

2.2 Intended Use

WARNING

These inline sight glasses were designed exclusively for the purposes described

above. Any other use beyond that described here or alteration of the inline sight

glass without written approval from the manufacturer is considered contrary to

the intended use. The manufacturer accepts no liability for damages arising from

this. The operator alone bears the risk. The inline sight glass may only be commis-

sioned once it is certain that all the safety systems are fully functioning and the

system in which the inline sight glass is installed corresponds to the EC directives.

Intended use also includes compliance with these operating instructions, including the maintenance

and repair conditions.

The work described in these operating instructions is described in a way intended to be understood and

carried out by experts

only

.

Expert

A person with appropriate training, suitable instruction and experience who is in a position to identify

risks and avoid hazards.

(As defi ned in EN 60204-1:2006)

Note

You can fi nd the technical data sheet on the product pages of the current AWH

“Strainers and Sight Glasses” catalogue, on the Internet or you can request it

directly from Armaturenwerk Hötensleben GmbH.

«
...
5
6
7
8
9
...
»

Содержание DN10





























Отзывы:

Нет отзывов