Copyright 2019, AWE. No part of this document may be reused or duplicated without the express permission of AWE/Secor Ltd. All rights reserved. Rev1.0
Gather the AWE mounting bracket and push in
the 3 OEM rubber mounting grommets, as shown
in
Figure 10
.
Secure the AWE carbon intake tube onto the
AWE mounting bracket, with the 3 supplied
screws and washers, as shown in
Figure 11
.
Careful not to over tighten hardware, as
carbon could crack.
Install the AWE air filter onto the AWE intake
tube and tighten the 110
-
130 worm drive clamp
hose clamp, as shown in
Figure 12
.
