Copyright 2019, AWE. No part of this document may be reused or duplicated without the express permission of AWE/Secor Ltd. All rights reserved. Rev1.0
Remove the hose from OEM the intake, pointed out in
Figure 3
-
1
. To remove, squeeze the clamp
tabs together and wiggle the hose off, shown in
Figure 3
-
2
.
Loosen the 2 hose clamps holding the OEM intake hose in place, shown in
Figure 4
-
1
. Then
carefully remove the intake hose from the intake, shown in
Figure 4
-
2
.
