Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3
Gather your four AWE exhaust tips, slide them on to the tip outlet sections and orient them so the
AWE logo is facing up. Using the provided integrated clamp hardware kit snug the tips down but do
not fully tighten to allow for final adjustments.
To install the exhaust tips with integrated
clamps, first, attach the exhaust tip in the
proper orientation onto the exhaust outlet tube.
Insert one of the carriage bolts from the
hardware kit
(3910
-
41010)
through the tab on
the exhaust tip and thread on one of the
corresponding nuts.
Using anti
-
seize on the bolt threads will help
installation and prevent breakage of hardware.
This exhaust system only has 4 exhaust
tips while the integrated clamp kit has
enough hardware for our 4 tip exhaust systems.
You will have 2 sets of hardware left over that
will not be used.
