Copyright 2022, AWE. No part of this document may be reused or duplicated without the express permission of AWE. All rights reserved. Rev 1.3
Install the provided exhaust hanger split collar clamps. Use the included hex wrench to help keep the
exhaust system aligned and secure. Install these clamps in the orientation for the driver side shown
in
Figure 19
-
1
,and the passenger side
Figure 19
-
2
.
Gather your AWE tips to install on the tailpipes. First slide a provided clamp on each tip. Then slide
the tips over each tailpipe, with the logo facing up to the desired depth. Once the desired depth is
set tighten the clamps, as shown at (
A
) in
Figure 18
-
1
and
Figure 18
-
2
.
