27
CLEANING
AND
MAINTENANCE
By ensuring proper cleaning and maintenance
of your cooker you can have a significant
influence on the continuing fault-free
operation of your appliance.
Before you start cleaning, the cooker must
be switched off and you should ensure
that all knobs are set to the “ ” position
Do not start cleaning until the cooker has
completely cooled.
Front side of the casting
For cleaning of frontal part of the cooker
use the usual cleaning agents and follow
the manufacture’s instructions.
Never use any aggressive cleaning agents
or dish cleaning accessories which might
cause scratches.
Cooktop
Clean the knob and handles with soft
cloth and liquid cleaners, intended for
use of smooth enamel surfaces.
Gas grid, cooking area and burner
components should be cleaned with
warm water and mild detergent for
manual washing of dishes.
Thermal element and ignition device
should be cleaned with soft brush. To
ensure perfect operation, these elements
must always be thoroughly clean.
Clean the crown and the crown cap.
on the burner crown free of dirt.
Always keep the gas outless nozzles
Upon completion of cleaning wipe all
components dry and replace them
carefully to their respective slots.
Oblique position of components may
cause troubled ignition of burners.
Caution!
The oven should be cleaned after
Discoloration of caps, due to high
temperatures, is inevitable, but is has no
adversary effect on normal operation of
burners.
Oven
every use. When cleaning the oven
the lighting should be switched on to
enable you to see the surface better.
The oven chamber should only be
washed with warm water and a small
amount of washing-up liquid.
After cleaning the oven champer wipe
it dry.
Caution!
Do not use cleaning products containing
abrasive materials for the cleaning and
maintenance of the glass front panel.
Service by an authorised person is
recommend, or if any of the following conditions
are noticed; incomplete ignition, appreciable
yellow tipping, carbon deposition, lifting, floating,
lighting back or objectionable odour. Refer to
the warranty card for service & parts contact
information.
Enamel coated and plastic surface
Crow caps are coated with black enamel.
