INSTALLATION
Adapting
the
cooker
another
type
of gas
This operation may only be carried out by
.
n
o
s
r
e
p
d
e
s
ir
o
h
t
u
a
y
l
e
t
a
ir
p
o
r
p
p
a
n
a
To adapt the cooker to be
s
e
l
z
z
o
n
r
e
n
r
u
b
e
h
t
,
s
a
g
f
o
e
p
y
t
r
e
h
t
o
n
a
must be exchanged and the flame adjusted.
Caution!
When leaving the factory, burners are
adapted to use the gas specified on their
data plates and guarantee cards.
In order to adapt the cooker to burn a
different type of gas, you should:
●
Exchange nozzles (see tables below),
●
Adjust the flame intensity.
Burner turndown flame must also be adjusted to 25% of the
A correct flame has distinct internal cones of blue colour. A short, humming
flame or long, yellow and smoking one, without clearly outlined cones, shows improper
quality of gas in the household piping or a damaged or soiled burner. In order to cheak a
flame, heat a burner for around 10 minutes with a full flame, and next turn the valve knob
to the turndown flame position. The flame should not go out or jump onto the nozzles.
Hotplate burners do not require adjustment of primary air.
12
adjustment screw location.
high flame, refer to page 13 for
In order to perform the turndown adjustment, remove the gas burner control knobs.
When converting to a different gas type refer to page 10; gas connection.
Upright
Burner
Gas type
Injector
Size(mm)
TPP
(kPa)
NGC
(MJ/h)
Auxiliary
Semi-rapid
Rapid
Wok
Auxiliary
Semi-rapid
Rapid
Wok
Natural gas
Universal
LPG
0.88
1.17
1.57
1.30*2
0.52
0.68
0.88
0.73*2
1.0
2.75
3.6
6.3
10.8
14.4
3.6
6.3
10.8
14.4
Total Gas Consumption
Natural gas: 35.1MJ/h
Universal LPG :35.1MJ/h
600mm
●
●
●
E lectrical connections
Electric connection may be carried
out by qualified service personnel
only!
Wrong connection may permanently
damage parts of the appliance and
render your warranty void!
Mains voltage of the user(240V)must
be verified with the measuring device!
Three separrating switches should be
placed in accordance with the mains
connection.
Mains lead behind the cooker must be
placed in such manner to avoid
touching the back panel of the cooker
because of the heat it develops during
operation.
The mains lead extension may be
made by qualified personnel only
.
Repairs of electrical parts may be
carried out only by qualified
electrician.In case of malfunction call
the service center.
