OPERATION
Ignition without an ignitor
Light a match.
Press in the knob to the end and turn
it left to the MAX,
Ignite gas with a match.
，
Set
MIN)
required flame size(e.g.
Switch off the burner after finishing
cooking, turning the knob right (to the
off position ).
Knob
ignition
Press in the knob to the end and turn
it left to the MAX,
Hold until gas is lit
，
After the flame is lighted release the
pressure on the knob and set a
required flame size.
Caution
!
In cooker models equipped with a surface
burner safety valve, hold the knob pressed
down to the end when igniting for 10
seconds at the “large flame” position to
activate the safety device.
If the ignition device is out of order, either
due to power failure or humid ignition
device, use a match or a lighter to ignite
the gas.
●
Keep the button pressed for
approximately 10 second after ignition
to stabilize the flame.
●
If you failed to ignite the burner after
15 seconds. Shut the burner off and
wait for at least one minute before the
next attempt.
15
How to use gas burners
Choice of cookware
Mind that the diameter of a pan base is
always larger than the burner flame crown,
and that the pan itself is covered. The
recommended pan diameter is around 2.5
to 3 times larger than the burner diameter,
that is, for:
●
An auxiliary burner- a pan with a
diameter of 90 to 150 mm,
●
An medium burner- a pan with a
diameter of 160 to 220 mm,
●
A large burner - a pan with a diameter
of 200 to 240 mm, and the pan height
should not be greater than its
diameter.
WRONG
RIGHT
Gas
burner
control
knobs
Do not place anything, e.g. flame tamer or
griddle plate between pan and pan support.
the burner with a work stand, only use the
Do not remove the pan support and enclose
wok support supplied. Do not use large pots
or heavy weights which can bend the pan
Locate pan centrally over the burner so that
support or deflect flame onto the hotplate.
it is stable and does not overhang the
appliance.
