39
4 Transport and Storage
4.2.1 Board Bag
The Awake RÄVIK board bag is provided
with removable wheels. Due to the weight
of the board and all its accessories, we
recommended using the wheels even for
transporting the board short distances.
To install the wheels, first, slide the axle
through the opening located outside the
bottom of the bag.
Attach the wheels on either end of the axle
by depressing the quick-release button in
the center of the wheel, sliding the wheel
shaft into the axle and then releasing the
quick-release button.
Never drag the Awake RÄVIK along the
ground or other surfaces. Doing so
may cause wear to the body in such a
way that it’s water protective capacity
is compromised. This may also sharpen
the fins to a point where they become a
cutting edge and pose a risk to personal
safety.
4.2.2 Board Storage
Never store the Awake RÄVIK in water.
Storing the Awake RÄVIK in the water may
result in biological growth on and around
the impeller and the jet housing, causing
power loss. Should you have to leave the
Awake RÄVIK in water for a short time,
always make sure that it is moored in a
secure manner.
Never leave the Awake RÄVIK
unattended to prevent children or other
inexperienced persons from using it.
4.2 Storage
4.2.3 BP Storage
When storing the RÄVIK for long periods of
time, it’s recommended to remove the BP
and store it separately.
The BP must be charged between 80%
of maximum capacity when in storage
(4 bars on the LED display). Always be
sure to store your BP in a safe and dry
environment that is not subject to large
fluctuations in temperature. Check the
charge level periodically (approx. once
a month) during storage to ensure the
charge remains within the required range.
4.2.4 HC Storage
The HC should be rinsed with fresh water
after every use. It must be charged to 80%
of its maximum capacity when stored for
long periods of time.
Check the charge level periodically
(approximately once a month) during
storage to ensure the charge remains
within the required range.
