35
3 Operation
3.4 Charging
The charging progress is communicated
via the charge LEDs: When the BP reaches
20% charge the first charge LED will
remain in a fixed “on” state, once 40% is
reached the second charge LED will remain
fixed “on” and so on.
A full charge of the BP should take
approximately 80 minutes. When charging
is complete, all 5 charge LEDs will flash
green and the charger fan will switch off.
If overheating of the BP occurs at any time
during the charging process, the error LED
on the display will switch to a solidly red
state. If the temperature in the BP is above
a safe value, it will automatically slow
the charging rate in order to regulate the
temperature.
3.4.2 Charging the HC
Please adhear to the following procedure
when charging the HC:
1.
2.
3.
4.
To charge the HC, first, connect the USB A
wireless charger connector to the provided
DC power supply and plug it into a wall
outlet.
Alternatively, the wireless charger can
be connected directly to any USB outlet
intended for charging (for example in a car
or personal computer)
Insert the HC on to the wireless charger.
A dynamic charging sequency image on
the display will indicate that the HC is in a
charging state.
The dynamic charging sequency image will
show 3 bars when the HC is fully charged.
The charge remaining can be found at any
time in the top right corner of the display
when the HC is powered on.