AW Tools CS450, Руководство по эксплуатации

Страница: 18 / 44

- 18 -
DESCRIPTION
The chainsaw is designed for only the purpose of forest work such as felling, limbing and
cutting, and must not be used for any other purpose. Avoid running the engine indoors.
The machine is not intended for commercial use. Adequate, surefire and safe service of the
chainsaw depends on the proper use and maintenance of the device
SAFETY PRECAUTION
For your safety, before using this product read, understand, and follow all the information
provided with the Operating and safety instruction completely and familiarize yourself thoroughly
with the product, its components and recognize the hazards associated with its use. You must follow
basic Health and safety rules.
Inspect before each use. In case of any failure or doubt regarding the correct use of a chainsaw
you should report it to your supervisor, contact your dealer or local authorized service center.
The supplier does not accept responsibility for any damage or injury caused by
improper or incorrect use.
1. Use the chainsaw for the purpose it is intended for. Any other use could be dangerous or
damage the machine.
2. Never allow children or people unfamiliar with this owner's manual to use the chainsaw.
3. The machine should be carefully inspected before use.
4. Take off the chain guard and inspect the guide bar and a chain saw for safety in operation.
5. Never operate a chain saw using a one-handed grip, Always use a secure, two-handed grip.
Keep proper footing and balance at all times. Make sure to place a chain saw on firm
ground. The guide bar and a saw chain have to be unlocked (with chain brake off).
6. Always hold the machine firmly with both hands.
7. Kickback may occur when the nose or tip of the guide bar touches an object, or when the
wood closes in and pinches the saw chain in the cut. Tip contact may cause a lighting fast
reverse reaction, kicking the guide bar up and back toward the operator.
As a chain saw user you should take several steps to keep cutting jobs free from accident or
injury, i.e.:

do not let the tip or nose of the saw come near any solid object while the chain is rotating,

never let the saw dip into the ground,

make limbing and pruning cuts one at a time,

cut at a high engine speeds,

make sure that the area in which you are cutting is free from obstruction,

keep a good grip on the saw with both hands,

keep proper footing and balance at all times,

use a low kickback saw chain.
8. Your chainsaw produces poisonous exhaust fumes as soon as the combustible engine is
running. To reduce the risk of serious or fatal injury from breathing toxic fumes, never run
the chainsaw indoors or in poorly ventilated locations. Ensure proper ventilation when
working in trenches or other confined areas.
9. Under no circumstances neither the design of the machine be modified nor the attempt to
repair the machine be made.
10. Switch off the engine before carrying out any checks or maintenance.