AVYCON AVT BT130MT-B, Руководство пользователя

Страница: 17 / 47

press the middle OK button to set the shielding area, and adopt the up, down,
left and right direction buttons to move the red box to the position requiring
temperature shielding. Press the middle OK button after selection. The system
can provide three shielding areas in total. Press A button to switch the three
shielding areas for setting of position size. When the shielding area is selected,
press S button to switch the position or size adjustment mode, and C button to
delete the shielding area.
3.3.3 Thermal Image Saving
To save the current thermal image acquired, choose one of the four ways below:
3.3.4 Thermal Image Playback

After setting, press C button to quit the monitoring point setting box.

Press OK button to pop out the floating panel menu, select the "Take Photo"
option in the menu, and the system will save the image automatically.

Press
"S"
button, and press this button again to save after the image is frozen.

Press "S" button continuously for 3 seconds to save the image automatically.

Press the Shortcut button to save the image by setting the shortcut as the
"Take Photo" option.

There are two ways to open a file:
1
.
Press OK button to activate the main menu, and select the file in the sub-menu
of the "File Management" menu (Select by up, down, left and right buttons).
2
.
Click the "Preview" option in the floating panel, to open the file for options
(Switch options by left and right keys).

When the image is opened, replace the current image saved by up and low
buttons in the playback control panel.

Press cancel button, to exit the playback status and return to the real-
time temperature measurement status.
Human Body Temperature Rapid Screening Device
1 2