AVYCON AVT BT130MT-B, Руководство пользователя

Страница: 16 / 47


Open the lens cap, aim at the black body from 2 meters away, and adjust the
focal length of the lens of the thermal imager, to make the target image clear.

Press " A " button for automatic calibration, to obtain favorable thermal image.
Note: Unsharp focusing will lead to wrong measurement.
3.3.2 Monitoring Point Setting

Press Up button among the direction buttons, to pop out the monitoring
point setting box. The options below are available: black body area
setting, shielding area setting, reset, amplitude-comparison factor and black
body temperature.

Press the direction button to select the black body area setting option, press
the middle OK button to set the black position, and adopt the up, down, left
and right direction buttons to move the red box to the black body, with the red
cursor aiming at the center of the black body target as much as possible.
Press the middle OK button after selection. The box will turn blue at the
completion of selection.

Press the direction button to select the shielding body area setting option,
Human Body Temperature Rapid Screening Device
1 1