14
Input digital number and then press “MACRO” to call NO. 2 macro instruction. Moving the joystick
down can display all information of this macro instruction. Press “ESC” key of the keyboard to
return to the main menu of the keyboard.
4.8 PTZ Control
Only when the PTZ is input to the window and there is not sequence display in this window, can
the PTZ control be effective—that is, the camera input to this window must be a PTZ device (or
speed dome).
4.8.1 Move or Stop
The setting steps are as follow.
1. Select the output (monitor). For example, input 1 and press “MON”.
2. Select the window. For example, input 3 and press “WIN”.
3. Control the speed dome/PTZ by moving the joystick. When moving the joystick back to the
original place, the speed dome stops moving.
4.7 Alarm Window Setup
You can set the designated window as an alarm window. The designated window is NO.1
window by default, which cannot be modified in case the designated window set by the user is
not existence. The setting steps are as follow.
1. Select the output. For example, input 1 and press “MON” to select NO.1 monitor.
2. Press “ALARM” key to set the designated NO.1 window (channel) as alarm window. If the current
NO.1 window (channel) has been set as alarm window, the alarm window will be
cancelled by the above operation.
Decoding
