4
INSTALLATION
Determining Loudspeaker Locations
l
Plan locations with no more than 25'-30' spacing between satellite speakers.
70/100 volt systems can be fine-tuned further using the wattage tap setting to determine the final volume
l
Landscape speakers should be installed at ground level using the included ground spikes.
Mounting Considerations
l
Clearance around the speaker is required for installing, connecting, and adjusting the angle of the speaker.
Care should be taken while selecting the mounting area so that the speakers do not become a trip hazard or
an obstacle for landscaping equipment.
l
Avoid locations where lawn irrigation sprinklers might spray water directly into the loudspeaker.
The loudspeakers will not be damaged by normal rainfall, but spraying water directly into the
speakers may cause damage.
Loudspeaker Mounting and Angle Adjustments
A. Pan
The pan adjustment of the loudspeaker allows for left to right alignment of sound coverage. This is adjusted
using the mounting base threads. After attaching the loudspeaker to a compatible mounting accessory,
route the makeup lead wires on the speaker into the mounting device, and then thread the speaker base
in, leaving about 1/2 turn of play to allow for final adjustment. After the loudspeaker is installed and
positioned correctly, tighten it securely into place.
B. Tilt
The tilt mechanism permits vertical adjustment of sound coverage. Adjust the angle of the speaker by
loosening the Phillips set screw on the pivot bracket as illustrated. Once the desired position is
achieved, re-tighten the screw.
of each loudspeaker.
