6
Connecting the Amplifier and Testing
1.
After connecting each loudspeaker to the wire run and setting the taps, attach the speaker wires to the
amplifier, (verify polarity is correct)
making sure to mirror the wiring pattern used in the loudspeakers, + to
+ and – to –. Connect the amplifier to a source and power on the amplifier and test the system.
2.
Listen to the system from several locations in the listening area. If an area is too loud or quiet, adjust
speaker
taps or the amplifier volume accordingly until the volume and sound quality is optimized. Check
speaker placement and ensure it correctly placed for on and off axis response.
3.
After optimizing the settings, check the total wattage again to be sure the amp isn’t being overworked. It is
a
good idea to let the system play for about a half hour after setup is done to be sure that the system is
reliable. CAUTION: If amplifier becomes extremely hot to the touch in a short period of time the settings
on the speaker are not correct.
4.
Once the system has been set and tested, the wiring or conduit can be buried or hidden. For any issues with
operation or sound quality, please see the Troubleshooting section before contacting AVX for
additional support.
SPECIFICATIONS
AVX-SAT 4
AVX-SAT 6
Description
two way passive lawn speaker
two way passive lawn speaker
Impedance
8 ohms
8 ohms
Sensitivity(dB/m/w)
83dB
86dB
Frequency response
80-20kHz
70-20kHz
Power handling
8
Ω
(40W RMS, 80W MAX)
8
Ω
(50W RMS, 100W MAX)
70V(15W/10W/5W/2.5W)
/
100V(30W/20W/10W/5W)
70V(15W/10W/5W/2.5W)
/
100V(30W/20W/10W/5W)
Woofer
1*4" woofer
（
Rubber IMPP cone
）
1*6" woofer
（
Rubber IMPP cone
）
Tweeter
0.75" aluminium dome tweeter
0.75" aluminium dome tweeter
Connector
Flying Leads
Flying Leads
Cabinet
PP with Matte paint finish
PP with Matte paint finish
Dimensions
135.7mm Dia x 203.2mm Long
179mm Dia x 257mm Long
MEAS/G.W.
45*39*63cm/8pcs/17KG
51.5*51*36.5cm/4pcs/11.5KG
TROUBLESHOOTING
AVX loudspeakers are designed to function trouble-free. Most problems that occur are due to simple wiring
and setup issues. If you have trouble, please check the list of simple fixes below or contact one of our helpful
AVX support representatives at 877-302-8397.
No Sound
• Verify that there is an audio signal coming from the source selected. Select or connect another source if
necessary.
• Ensure that the audio source is turned on and connected properly.
