G50/G50IR/G50Q/
G50L/G50VL
Manual
HIGH-SPEED PTZ
CAMERA SERIES
OPERATION MANUAL
Ver. 1.0
GERMAN
G50IR-MKII
ENGLISH
INSTALLATION
English
Keep the original box for
possible transport in the
future.
Switch 1:
Switch 2:
ID Setup
Digit 1 to 5: Protocol setup
Digit 6,7: Baud-Rate
Digit 8: RS485 Termination(default: off)
For setting details, please refer to appendix A.
ID & protocol setup
Step 1
Loose the screws (4 pcs)
and open the base-part
Step 2
Take off the base
part for configuration
Step 3
Set the ID, Protocol
Baud-Rate and Termination
Sensor
Switch
I/O Interface
Red:AC24V
Black:AC24V
24V AC / 2A
24V
AC
POWER
BNC
VIDEO
RJ-11
RS-485
ALARM
Inner Pin: Video +
Outer Conn.:Video -
Green: RS-485 +
Yellow: RS-485 -
Power
Keyboard
Controller
Monitor
DVR
Connectors
Accessories
Unpacking
Basic Setup
Check-List before installation:
1. Telemetric Protocol setting
2. Dome ID setting
3. Termination setup
3. Necessary Accessories ( e.g Power
supply)
For telemetric control, make sure that:
1. All devices are set with same protocol
and comm setting.
2. All PTZ devices have an unique ID.
3. Control cable (Rs485) are connected
properly.
For controller setup, please refer to the
operation manual
Example:
Protocol: B02
Baud-Rate: 9600
ID:1
ID:2
Telemetric
1
Model Description
G50
G50IR / G50Q
IR- Headlight
G50VL
Visible Headlight
Do not use Voltage other
than 24V AC,otherweise
will destroy the camera.
Red:AC24V
Black:AC24V
24V AC / 2A
24V
AC
POWER
Power
Addition 24V AC
Power Supply is
require on G50VL
Beamer
G50L
IR-Laser Beam
DANGER
Laser Raidiation Class 3A.
Do not stare into Beam or View
Directly with Optical Instrument
G50M
Mobile Version
with Anti-Shock