Avue AU-G50IR-WB18, Руководство по эксплуатации

Страница: 10 / 17

PATTERNS
PATTERN NUMBER XX
PROGRAM PATTERN
RUN PATTERN
CLEAR PATTERN
EDIT PATTERN LABEL
BACK
EXIT
→
The Pattern-Tour is a custom-defined tour by recording user’s control action up to 180 sec per tour. This dome can
support up to 4 pattern tours.
PATTERN NUMBER:
PROGRAM PATTERN:
RUN PATTERN:
CLEAR PATTERN:
EDIT PATTERN LABEL:
Selected pattern tour
Record the tour. Enter this menu and start the tour recording, when finished,
Press[IRIS OPEN] to store.
Start the selected pattern tour
Delete the selected pattern
Assign the name of the pattern
Function Setting Pattern
TOUR
---------------------------------------
TOUR
NUMBER 1
EDIT TOUR
RUN
TOUR
CLEAR TOUR
BACK
EXIT
→
A tour is a automated cruising through selected preset positions with individual speed and dwell time. This PTZ supports up
to 4 tours with 24 position each.
TOUR NUMBER:
EDIT TOUR:
RUN TOUR:
CLEAR TOUR: Currently selected tour
Edit the selected tour
Start the selected tour
Delete the selected tour
Function Setting Tour
EDIT TOUR
---------------------------------------
P0-S-TM P0-S-TM P0-S-TM
- 00
- 00
- 00
- 00
- 00
- 00
- 00
- 00
BACK
EXIT
٠٠-٠- ٠٠ ٠٠-٠- ٠٠ ٠٠-٠
٠٠-٠- ٠٠ ٠٠-٠- ٠٠ ٠٠-٠
٠٠-٠- ٠٠ ٠٠-٠- ٠٠ ٠٠-٠
٠٠-٠- ٠٠ ٠٠-٠- ٠٠ ٠٠-٠
٠٠-٠- ٠٠ ٠٠-٠- ٠٠ ٠٠-٠
٠٠-٠- ٠٠ ٠٠-٠- ٠٠ ٠٠-٠
٠٠-٠- ٠٠ ٠٠-٠- ٠٠ ٠٠-٠
٠٠-٠- ٠٠ ٠٠-٠- ٠٠ ٠٠-٠
Function Setting Tour Edit Tour
PO
S:
TM:
: The preset position being included in the tour. If there is no preset position stored,please define the
preset at first.
The velocity when PTZ moves to this preset, between low1 - high 8.
The dwell before the PTZ moves to next point. between 1-60 second
The ZONE function allows user to define a perimeter with a name tag. The perimeter is defined by given a left- and right-end
of the PTZ range. When the camera enters this area, the name will be displayed on the screen, which provides better
orientation in surveillance application. Up to 8 zones are supported.
ZONE NUMBER:
SET LEFT LIMIT:
SET RIGHT LIMIT:
CLEAR ZONE:
EDIT ZONE LABEL: Currently selected zone
Set the left-end, press [IRIS OPEN] to store, or [IRIS CLOSE] to discard.
Set the right-end, press [IRIS OPEN] to store, or [IRIS CLOSE] to discard.
Delete the zone setting
Edit the name tag
ZONE
--------------------------------
ZONE NUMBER 1
SET LEFT LIMIT
SET RIGHT LIMIT
CLEAR ZONE
EDIT ZONE LABEL
BACK
EXIT
→
Function Setting Zones
OSD
7
English
FUNCTION SETTING
--------------------------------
PRESET
SCAN
PATTERNS
TOUR
ZONES
TIME RUNNING
BACK
EXIT
→
→
→
→
→
→
PRESET
---------------------------------
PRESET NUMBER XX
SET PRESET
SHOW PRESET
CLEAR PRESET
EDIT PRESET LABEL
BACK
→
PRESET NUMBER:
SET PRESET:
SHOW PRESET:
CLEAR PRESET:
EDIT PRESET LABEL
Selected preset position, supports up to 128 presets.
Setup the preset position. Enter this menu, move the PTZ to desired positon and press [IRIS
OPEN] to store, or [IRIS CLOSE] to discard.
Recall the preset position
Delete the preset position
: Assign the preset label.
Function Setting
Function Setting Presets
PRESET:
SCAN:
PATTERNS:
TOUR:
ZONES:
TIME RUNNING: Setup and manage the presents.
Define and manage the scan tours.
Pattern tours.
Preset Tours
Zone settings
Scheduled actions
Function Setting Scan
SCAN SPEED:
SET LEFT LIMIT:
SET RIGHT LIMIT:
RUN SCAN:
CLEAR SCAN:
EDIT SCAN LABEL:
Define the scan speed, lowest 1 - fastest 50
Define the left point of scan tour, press [IRIS OPEN] to store, or [IRIS CLOSE] to discard.
Define the right point of scan tour, press [IRIS OPEN] to store, or [IRIS CLOSE] to
discard.
Start the scan tour
Erase the stored scan tour
Assign a name of the tour
SCAN
----------------------------------------
SCAN SPEED
50
SET LEFT LIMIT
SET RIGHT LIMIT
RUN SCAN
CLEAR SCAN
EDIT SCAN LABEL
BACK
EXIT
→