Avtech AVC792H, Руководство по установке

Страница: 10 / 46

9
Note: If you can’t find the camera, make sure your LAN status indicator ( ) is always on, and search
again after 3 minutes.
If you connect two or more cameras to the wireless router, you’ll see many cameras with different IP
addresses after searching. To know which camera you’re configuring, you may identify each with its
unique MAC address.
Note: The MAC address can be found on the sticker at the rear panel of the camera.
Step3: Select the IP address you want to configure to
show the IP address setting page.
Switch the tab from “DHCP” to “Static”.
The default port number is 88. You may
change it to any value (such as 8080) if the
port number of 88 is blocked.
Step4: Select “Apply” to confirm all your changes.
Then, wait till you see “
Done
” or “
Fail
” in
“Status”.
Regardless which message you see, proceed
as instructed below:
For
Done
, you’ll return to the new device page.
For
Fail
, select “ ” on the top right side. You’ll
later be prompted to select “DDNS” or “Local IP”.
Select “DDNS” and return to the new device page.