AVT MAGIC AD1 ETI, Руководство по оборудованию

Страница: 74 / 106

PAGE 74
M A G I C A D 1 E T I M u l t i S o f t w a r e
FIG. 48 DETAILED VEW OF TREE CONTROL LIST
A green LED next to the system name shows that the connection is ok and that
no alarms have ocurred.
If the LED is displayedin blue, an alarm has been ocurred.
A red LED shows a current alarm or a faulty PC connection.
If you double-click on the system name or the LED, the
System Monitor
is
displayed.
If you click on the system name or the LED with the right mouse key, you can
select if you want to open the System Monitor (
Open System Monitor
) or
open the configuration dialogue (
Open Configuration Dialogue
).
The tree structure with parent nodes (e.g.
ETI Master
in Fig. 48, Page 74) and
child nodes (e.g.
Decoder 1
,
Decoder 2
and
Decoder 3
in Fig. 48, Page 74)
can be created by using the following name structure under
System name
(see Page 43) in the configuration:
Name of parent node - Name of Child node
Example: ETI Master - Decoder 1
Add a MAGIC AD1 ETI Decoder to the control list
To add a new system, click on the
Add/Edit
button in the
Control Port Set-
tings
window (Fig. 46, Page 73). The window for the
Communication Inter-
face Parameters
is displayed. Please select the option
LAN
under
Interface
.
FIG. 49 LAN PARAMETERS
Under
Parameter
→
Interface
edit
<Default>
. If there should be more than
one network interface card in your PC, select the desired one.
The standard
IP Address
of the system is
192.168.96.102
and the standard
control
Port 10000
.
To enable a connection with your PC, you have to be in the same subnet.
Therefore, please enter an IP address from your subnet
1
.
1
In this way you can find out your own subnet: Under Windows XP click on
Start
→
Execute ...
.
Enter
cmd
in the command line. An entry window is displayed in which you must enter
ipcon-
fig
. Your IP address is displayed (e.g. 192.168.12.35). Your subnet is accordingly 192.168.12.xxx.