AVT MAGIC AD1 ETI, Руководство по оборудованию

Страница: 29 / 106

PAGE 29
W i n d o w s P C S o f t w a r e
FIG. 9 DISPLAY OF THE DECODER STATUS
The following information is displayed:
– Transmission mode (
Mode
)
• Coding algorithm (DAB or DAB+)
• Coding mode (Mono, Dual Channel, Stereo, Joint Stereo, SBR, PS)
• Sampling frequency (16 kHz, 24 kHz, 32 kHz, 48 kHz)
– Bit rate (
Rate
) for the Audio transmission
– Subchannel ID (
SubChId
) of the decoded component
– Service ID (
Service
)
– Service Label (
S-Label
)
–
Type
of the monitored component (audio or data)
– Indication if it is a
Primary
component (yes) or not (no);
for e.g. Audio services in two language there are always a primary and
a secondary Audio component
–
CA
(Conditional Access): yes or no
Under
Headphone
you can see the levels of the left (
L
) and the right (
R
) chan-
nel and adjust the volume via the slide controller.
4.5.7 Alarm Counter Reset
Below the Decoder status window you will find the
Alarm Counter Reset
button. If you press this button, all LEDs will be reset to green and all error
counters are reset to 0.