AVT MAGIC AD1 ETI, Руководство по оборудованию

Страница: 26 / 106

PAGE 26
W i n d o w s P C S o f t w a r e
Meaning of the LEDs
The LEDs can be displayed in three different colors:
–
green:
no error
–
red:
error
–
blue:
error has occured
To reset all LEDs to green, you need to press the
Alarm Counter Reset
button
(see CHAPTER 4.5.7, Page 29).
4.5.2 2 Mbit/s Status
In this window the status of the 2-Mbit/s signal is displayed. If the system is
configured in the right way and connected to the 2-Mbit/s network, the
Si-
gnal
LED is displayed in green.
FIG. 5 DISPLAY OF THE 2 MBIT/S STATUS
Signal
The LED signals an error, if there is no signal on the 2-Mbit line.
By pressing the
Detail
button the System Monitor window is opened.
4.5.3 ETI Status
Under the ETI Status window all information regarding the ETI signal is dis-
played.
NOTE If the connection is faulty, please check the following points:
– Power supply cable is plugged in
– Circuit switch of the system is in the ON position (display is available)
– Network cable is connected to the PC and the system
– Right IP address and right Control Port are selected in the software
(
Configuration
→
Control Interface
, see Page 32)